Store your favorites, on every computer.
|
Store your favorites, on every computer. |
I haven't taken off the valve to check the spray, but the solenoid
does click whenever I hit the button, including when the car is off
and not cranking. I have a new battery, but the wiring may have been
adulterated by the PO.
Is the 12v signal to the cold start valve supposed to last a while, or
just during cranking?
Thanks,
--Greg
--- In dmcnews@xxxxxxxxxxxxxxx, Martin Gutkowski - DMUK Ltd
<martin@xxxx> wrote:
<SNIP>
> Correct, but remember that the thermotime switch works on the _ground_
> side of the circuit. The 12v feed comes directly off the starter
> solenoid and the drop to 9v might suggest a broken wire or simply a
poor
> battery? Does the cold start valve spray when 12v is applied across it,
> and not when you're cranking?
>
> Martin
> #1458
> #4426
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/