Store your favorites, on every computer.
|
Store your favorites, on every computer. |
Duke.
It may be a very simple wiring issue within the light/switch module
itself.
It is possible to accidently wire the switches so that the 'on'
function works but the delay doesn't...
Once the switch module has been prised gently from the roof you
should have 3 wires; black, purple, purple/white. The module itself
has three connectors which should be cleaned whilst accessible.
The purple wire is the 'live' and should be connected to the side
with the single pin.
The side with the two pins can be wired either way, allowing you to
decide which way to push for manual/auto lights.
The black wire is the manual 'on' wire.
The purple/white is the connector which allows the courtesy circuit
to work.
In my case the black wire had been placed onto the single pin,
meaning only the 'manual on' function worked.
John Chapelhow
MMG 287W : 'Boeing' #0737
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/