Store your favorites, on every computer.
|
Store your favorites, on every computer. |
Brake master cylinders that are 25 years old do weird things. The seals are
hard and the spring may be sprung. That's why I tell everyone about being
careful about the NOS stock.
John Hervey
www.specialtauto.com
-----Original Message-----
From: dmcnews@xxxxxxxxxxxxxxx [mailto:dmcnews@xxxxxxxxxxxxxxx]On Behalf
Of mdcdmc81
Sent: Sunday, May 29, 2005 4:45 PM
To: dmcnews@xxxxxxxxxxxxxxx
Subject: [DML] Front brakes wont release
Had a leak from my brake master cylinder. I changed the master
cylinder with a new one from DMC Houston, replaced the brake fluid
with Castrol GT-LMA, and bled all the lines in the proper order. Now
the front brakes lock up after driving a few miles. It takes about 5
minutes for them to release after pulling over. Could it be that the
new master cylinder is bad? I'm stumped.
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at
http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/