Store your favorites, on every computer.
|
Store your favorites, on every computer. |
A involved job of replacing a worn cam has gotten more involved now
that a hea bolt has snapped. Luckily it broke just below the bolt's
head so there is about 6 inches of bolt to work with when I remove it.
I'm looking for suggestions on or offline on how to remove this. Its
one of the end bolts farthest towards the rear of the car.
What I also don't understand is why this bolt broke rather than come
out. Its a new bolt from the last time I had the head off. Hadnt
driven the car enough at that point to be aware of the cam wear. When
I install the new head bolts what can I do to ensure they come out
properly for the next guy?
Jeff Phillips
#10544
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/