Store your favorites, on every computer.
|
Store your favorites, on every computer. |
I opened a trunk with a broken cable at the tech session in NJ about 4 years
ago when it was deemed hopeless.
All I used was a piece of thin metal rod ( a bit heavier than a coat hanger.
Bent it like an L
Slid it under the hood and pulled back until it hit the latch mechanism
Then pull.
Took a few tries and a few small bends to hit what was needed but it tends
to jam pretty well in the latch mechanism good pull and it opens.
I have opened about 4 or 5 cars this way. Trick is to have a stiff enough
rod without being too big.
Hope this helps
Ken
PS Much easier on early cars with gas flap
[Non-text portions of this message have been removed]
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/