Store your favorites, on every computer.
|
Store your favorites, on every computer. |
Do you mean the axle seals? Did you put a speedi-sleeve on the flanges?
(Hi Mark V). They are usually pretty rough and rusty, they will leak
right thru a new seal.
Pulling the seal will definitely tear it up. The level of the oil
**should** be level with the drain plug. So, yes, level is above the
axle port.
Dave Swingle
--- In dmcnews@xxxxxxxxxxxxxxx, "schab932000" <schab932000@...> wrote:
>
> This may seam like a dumb question, but I'm going to ask
> anyway. I just finished replacing my clutch and all the
> components that go with it. I also replaced my transmission
> seals, filled the trans back up and put it back in. Well, it appears
> one of the new seals must have not been set correctly, because I
> noticed a little leak. Grrrrr.
>
> So here's the question, I'm going to replace the seal one more
> time. I'll have to order a new one since pulling it out will probably
> tear it up. Is the trans fluid level under the seal? I want to avoid
> draining the trans if possible.
>
>
> Thanks,
>
> Pat
>
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/