Store your favorites, on every computer.
|
Store your favorites, on every computer. |
I've been told by many that I don't need to remove the W intake pipe
to replace the thermostat. I was able to get the front bolt off of
the housing, but how does one go about removing the other one under
the W pipe?
I have the throttle partly removed to get to the back bolt, but my
little 7/8 wrench just doesn't have the length to reach in there to
have any torque.
Not enough room in the compartment for a breaker bar either. The
water bottle is in the way.
Thanx in advance.
Johnny
5518
AZ-D
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/